Woodworking engraving machine common four major problems

Woodworking engraving machine will inevitably have some problems during the day-to-day work. Some reasons are due to the problem of the machine itself. Some reasons are caused by the customer's misoperation. The following Jinan Ludiao Company made some common problems. Some sorting for your reference:
One: During the working process of the woodworking engraving machine, the spindle motor suddenly stops or turns slowly.
the reason:
1. The operating voltage is unstable or overloaded, and a voltage regulator can be added.
2. Check if the middle line is connected and whether the line is desoldered.
Jinan Ludiao CNC engraving machine adopts advanced assembly technology. Each factory machine has passed 72 hours of high-strength quality testing to ensure machine 0 failure. At the same time, professional and timely after-sales service team also helps customers solve machine use for the first time. The failures that occur during the process ensure that the customer's production accuracy is not affected.
Two: Woodworking engraving machine can not be carved at the origin.
the reason:
1. Whether the layout size of the file matches the machine.
2. Check if offset (OFFSET) is set and the layout is correct.
Three: The woodworking engraving machine makes an abnormal sound when it starts resetting or it always has a bad limit switch.
the reason:
1. The top is not limited to the limit switch, and it can be corrected.
2. The drive line is not in good contact and the drive line can be fixed.
3. The limit switch line is not connected, and the line can be connected.
4. The limit switch is damaged and can be replaced.
Four: When the woodworking engraving machine sets the origin, it sometimes shifts forward or to the right and the offset distance is uncertain.
the reason:
1. The limit switch fails. When the system returns to the system origin, the limit switch is closed and popped open. Change the limit switch.
2. The drive line is loose. Try to fix it tight.