During this decade, the modern engraving mechanism version was completely imitation of the engraving mechanism version that optimized the manual plate design. Through the upgrade of the software, the engraving has a slope of 0.3mm, the light decay at the corner of the engraving is automatically compensated, and the automatic engraving speed is improved, which completely prevents some errors in the manual engraving. The advantages of the engraving mechanism version are basically hand-engraved plate making. Eliminated out.
There are two main control systems for engraving machines, one is a computer-controlled control system, and the other is a DSP control system with a handle-controlled design. But both control systems require a computer to boot. The following is a small series to briefly explain the difference between the two engraving machines.
The DSP control system does not mean that there is no need for a computer. It is an engraving machine that keeps the path of the good on the storage device and is controlled by the handle. This control system also requires a computer. It is necessary to first make a path on the computer and insert the storage device into the handle. Since the handle is linked to the engraving machine, it controls the operation of the engraving machine. This kind of control system is quite simple and often used for outdoor work. The general stone engraving machine is the control system used.
