Although the belief in power outages has become less and less with the development of technology, it is only necessary to understand what should happen if the woodworking engraving machine is in the process of working. If the wood engraving machine encounters a sudden power failure, how should we deal with the work site problem while ensuring safety, and how to ensure the perfect treatment as much as possible. Next, follow the CNC network Xiaobian to learn how to do the power-off of the woodworking engraving machine.
Is the automatic power off when engraving, or automatically power off when booting, how to power off when the boot operation, the reason 1, the current is too large, please ensure that the maximum current of the engraving machine is less than the rated current of the air switch. More likely. Please touch the surface of the switch after the switch trips. Is the temperature higher? If so, it is the reason why the engraving machine is too large.
The engraving machine is powered off first, and the computer is powered off. In this case, because there is still gas in the transmission at the time of power failure, if you want to avoid this situation, you need to mark the material before starting the engraving. The origin, after encountering this situation, restart the device, you can easily solve it.
When we use the engraving machine, we can always encounter the problem of power failure and power failure. Once the power is cut off, we will not continue to engrave the misplacement. The original point will not go back. The following Langchen CNC engraving machine will tell you about the method. First determine if your machine can return to the machine origin. If you can turn off the ncstudio when the engraving machine is powered off, first return to the machine origin, all axes. Then click on the breakpoint to continue. It's very simple.
First of all, the engraving machine has only one machine origin. This point is a point that will never change. When we use the engraving machine, we will return the z-axis, x-axis and y-axis to the mechanical origin. After ok, After the power failure, I was not afraid. When we used the engraving machine, the computer and the engraving machine suddenly turned off, or the computer crashed and everything failed. We could not continue the engraving machine. At this time, we put the three axes of xyz. Go back to the machine origin, and then click on to continue the engraving. Of course, you can adjust the break number later in the advanced start. If you don't know that the tube is not working, then after returning to the machine origin, return to the workpiece. Origin, this point is the processing origin that we set ourselves when we processed.
In order to reduce unnecessary losses, you must remember to return the machine's xyz axis to the machine origin when you work! If you feel that it is inconvenient to return to the machine origin every time, then the breakpoint point of the knife servo is generally not misaligned, unless the 45 degree knife, the next yz axis is fine.
